MENU

8 in. Wood Stove Chimney

8 In. Wood Stove Chimney
A DVL Close Clearance Adapter must be used when connecting DVL pipe to a ceiling support box or finishing collar.
When connecting DuraBlack pipe, a DuraBlack Slip Connector or Snap Lock Adapter must be used.
A Wall Thimble must be installed with an appropriate length of chimney pipe for all horizontal through-the-wall installations.  To accommodate thicker walls, the telescoping pieces can be separated, and a field-fabricated extension may be installed.
An Attic Insulation Shield must be used in all installations that pass through an attic, regardless of whether the attic is insulated or not.
A Firestop Radiation Shield must be used when a chimney passes through a floor or ceiling without a support box.
  • Close Clearance Adapter DVL 8 in
    Close Clearance Adapter DVL 8 in
    8 " Close Clearance Adapter DVL 8 " Close Clearance Adapter DVL...
    69895
  • 8 in Adaptor Snap-Lock Black Connects To Single-wall Stovep
    8 in Adaptor Snap-Lock Black Connects To Single-wall Stovep
    8 in , Adaptor, Snap-Lock, Black, Connects To Single-wall Stovepipe 8 in , Adaptor, Snap-Lock, Black, Connects To Single-wall Stovepipe...
    69890
  • 8 in Dura-plus Cathedral Ceiling Support Galvalume
    8 in Dura-plus Cathedral Ceiling Support Galvalume
    8 in DuraPlus Cathedral Ceiling Support, Galvalume Painted Black, Trim Collar Included Use with flat, vaulted or cathedral ceilings. Square Ceiling support Box is painted black. Refer to Ceiling Pitch table to dtermine size of support box needed. Supports up to 40 ft. of DuraPlus Chimney. Starter Section built in. For adapters see DVL-DuraBlack section. Manufacturer fts Part Number 9248AN 8 in DuraPlus Cathedral Ceiling Support, Galvalume Painted Black, Trim Collar In...
    69880
  • 8 in Dura-plus Round Ceiling Support Galvalume
    8 in Dura-plus Round Ceiling Support Galvalume
    8 in DuraPlus Round Ceiling Support, Galvalume Painted Black, Trim Collar Included Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Supports up to 40 ft. of DuraPlus Chimney. Use adapter to attache DVL or DuraBlack to the support box. For adapters see DVL-DuraBlack section. Manufacturer fts Part Number 9245N 8 in DuraPlus Round Ceiling Support, Galvalume Painted Black, Trim Collar Includ...
    69875
  • Base Plate Zero Clearance Adaptor
    Base Plate Zero Clearance Adaptor
    8 in DuraPlus Base Plate zero Clearance Adaptor Use to adapt on a zero clearance fireplace when using DuraPlus directly off the unit. Starter section built in. Manufacturer fts Part Number 9201 8 in DuraPlus Base Plate zero Clearance Adaptor Use to adapt on a zero clearance...
    69756
  • Wall Thimble Galvanized Steel
    Wall Thimble Galvanized Steel
    8 in DuraPlus Wall Thimble, Galvanized Steel Painted Black,with Trim Adjusts from a minimum of 4 3/4 inches to a maximum of 7 3/4 inches wall thickness, and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be extended up to 16 inches with a field-fabricated extension installed. Interior trim ring painted black. Must be installed with DuraPlus chimney pipe... 8 in DuraPlus Wall Thimble, Galvanized Steel Painted Black,with Trim Adjusts fro...
    69831
  • Wall Thimble Stainless Steel
    Wall Thimble Stainless Steel
    8 in DuraPlus Wall Thimble, Stainless Steel Painted Black,with Trim Adjusts from a minimum of 4 3/4 inches to a maximum of 7 3/4 inches wall thickness, and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be extended up to 16 inches with a field-fabricated extension installed. Interior trim ring painted black. Must be installed with DuraPlus chimney pipe... 8 in DuraPlus Wall Thimble, Stainless Steel Painted Black,with Trim Adjusts from...
    69830
  • 8 in x 12 in Dura-plus Chimney Length
    8 in x 12 in Dura-plus Chimney Length
    8 in x 12 in DuraPlus Chimney Length, Inner Liner 430-alloy Stainless, Galvanized Outer Wall Designed for appliances tested and listed for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heater, or other appliances fueled by wood, oil, coal, or gas. 6 inch, 9 inch and 12 inch chimney pipe has 1 inch insulation blanket; 24 inch, 36 inch chimney pipe has 1/2 inch... 8 in x 12 in DuraPlus Chimney Length, Inner Liner 430-alloy Stainless, Galvanize...
    69804
  • 8 in x 24 in Dura-plus Chimney Length
    8 in x 24 in Dura-plus Chimney Length
    8 in x 24 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Stainless Outer Wall 8 in x 24 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Stainles...
    69802
  • 8 in x 24 in Dura-plus Chimney Length
    8 in x 24 in Dura-plus Chimney Length
    8 in x 24 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Galvanized Outer Wall 8 in x 24 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Galvaniz...
    69803
  • 8 in x 36 in Dura-plus Chimney Length
    8 in x 36 in Dura-plus Chimney Length
    8 in x 36 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Stainless Outer Wall 8 in x 36 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Stainles...
    69800
  • 8 in x 36 in Dura-plus Chimney Length
    8 in x 36 in Dura-plus Chimney Length
    8 in x 36 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Galvanized Outer Wall 8 in x 36 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Galvaniz...
    69801
  • 8 in x 6 in Dura-plus Chimney Length
    8 in x 6 in Dura-plus Chimney Length
    8 in x 6 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Galvanized Outer Wall 8 in x 6 in Dura/plus Chimney Length, Inner Liner 430-alloy Stainless, Galvanize...
    69806
  • 8 in Dura-plus Flashing 0-12-6-12 Galvalume Storm Collar Not I
    8 in Dura-plus Flashing 0-12-6-12 Galvalume Storm Collar Not I
    8 in DuraPlus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included Use to weather proof the penetration of chimney pipe through the roof. Storm Collar Required . Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a verticle rise of 6 inches over a horizontal distance of 12 inches. Manufacturer fts Part Number 9249V 8 in DuraPlus Flashing 0/12-6/12, Galvalume, Storm Collar Not Included Use to we...
    69866
  • 8 in Dura-plus Flashing 7-12-12-12 Galvalume
    8 in Dura-plus Flashing 7-12-12-12 Galvalume
    8 in DuraPlus Flashing 7/12-12/12, Galvalume, Storm Collar Not Included Use to weather proof the penetration of chimney pipe through the roof. Storm Collar Required . Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6 inches over a horizontal distance of 12 inches. Manufacturer fts Part Number 9250V 8 in DuraPlus Flashing 7/12-12/12, Galvalume, Storm Collar Not Included Use to w...
    69867
  • Storm Collar
    Storm Collar
     8 inch Wood Stove Chimney Storm Collar  8 inch Wood Stove Chimney Storm Collar...
    9959-69856
  • 8 in Dura-plus Chimney Cap Stainless
    8 in Dura-plus Chimney Cap Stainless
    8 in DuraPlus Chimney Cap, Stainless Required where chimney pipe terminates above the roof line. Removable screws allow for cleaning of the chimney and spark arrestor screen. Made of stainless steel. Shown with optional Spark Arrestor screen. Manufacturer fts Part Number 9184 8 in DuraPlus Chimney Cap, Stainless Required where chimney pipe terminates abov...
    69855
  • 8 in Dura-plus 15 Deg Galvalume Elbow Kit Includes 2 Adj Elbows
    8 in Dura-plus 15 Deg Galvalume Elbow Kit Includes 2 Adj Elbows
    8 in DuraPlus 15 Deg Galvalume Elbow Kit, Includes 2 Adj Elbows, 1 Elbow Strap Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Ofsets greater than 30 degrees are not permitted in accordance to UL 103 standards. Elbows swivel 360 degrees at base angles are not adjustable. A pair of elbows is required to return an offset chimney... 8 in DuraPlus 15 Deg Galvalume Elbow Kit, Includes 2 Adj Elbows, 1 Elbow Strap U...
    69813
  • 8 in Dura-plus 30 Deg Galvalume Elbow Kit Includes 2 Adj Elbows
    8 in Dura-plus 30 Deg Galvalume Elbow Kit Includes 2 Adj Elbows
    8 in DuraPlus 30 Deg Galvalume Elbow Kit, Includes 2 Adj Elbows, 1 Elbow Strap Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30 degrees are not permitted in accordance to UL 103 standards. Elbows swivel 360 degrees at base angles are not adjustable. A pair of elbows is required to return an offset chimney... 8 in DuraPlus 30 Deg Galvalume Elbow Kit, Includes 2 Adj Elbows, 1 Elbow Strap U...
    69816
  • 8 in Dura-plus Elbow Strap Galvalume
    8 in Dura-plus Elbow Strap Galvalume
    8 in Dura/plus Elbow Strap, Galvalume 8 in Dura/plus Elbow Strap, Galvalume...
    69819
  • 8 in Dura-plus Tee Support Galvanized Steel
    8 in Dura-plus Tee Support Galvanized Steel
    8 in DuraPlus Tee Support, Galvanized Steel Use to support the Tee; suspended from a wall. Supports up to 35 ft. of DuraPlus Chimney. Starter Section built in. Manufacturer fts Part Number 9272 8 in DuraPlus Tee Support, Galvanized Steel Use to support the Tee; suspended fr...
    69826
  • 8 in Dura-plus Tee Support Stainless Steel
    8 in Dura-plus Tee Support Stainless Steel
    8 in DuraPlus Tee Support, Stainless Steel Use to support the Tee; suspended from a wall. Supports up to 35 ft. of DuraPlus Chimney. Starter Section built in. Manufacturer fts Part Number 9272SS 8 in DuraPlus Tee Support, Stainless Steel Use to support the Tee; suspended fro...
    69825
  • 8 in Dura-plus Tee With Cap Galvanized Steel
    8 in Dura-plus Tee With Cap Galvanized Steel
    8 in DuraPlus Tee With Cap, Galvanized Steel Use for through-the-wall chimney installations. The tee clean-out cap is removable for easy chimney cleaning or inspection. Wall Straps, a Wall Thimble, and a Tee Support must be installed with the Tee as directied. Tees have a 1 inch insulating blanket. Ventilation air for chimney must be drawn from outdoors Manufacturer fts Part Number 9267 8 in DuraPlus Tee With Cap, Galvanized Steel Use for through-the-wall chimney in...
    69821
  • 8 in Dura-plus Tee With Cap Stainless Steel
    8 in Dura-plus Tee With Cap Stainless Steel
    8 in DuraPlus Tee With Cap, Stainless Steel Use for through-the-wall chimney installations. The tee clean-out cap is removable for easy chimney cleaning or inspection. Wall Straps, a Wall Thimble, and a Tee Support must be installed with the Tee as directed. Tees have a 1 inch insulating blanket. Ventilation air for chimney must be drawn from outdoors. Manufacturer fts Part Number 9267SS 8 in DuraPlus Tee With Cap, Stainless Steel Use for through-the-wall chimney ins...
    69820
  • 8 in Dura-plus Firestop Radiation Shield
    8 in Dura-plus Firestop Radiation Shield
    8 in DuraPlus Firestop Radiation Shield, Galvalume Use in ceiling/floor penetrations when a ceiling support is not used. Not required when passing through the roof. Fits on underside of ceiling and adjusts to cover framing.. Manufacturer Part Number 9244 8 in DuraPlus Firestop Radiation Shield, Galvalume Use in ceiling/floor penetrat...
    69872
  • 8 in Dura-plus Wall Strap Galvanized Steel
    8 in Dura-plus Wall Strap Galvanized Steel
    8 in DuraPlus Wall Strap, Galvanized Steel Use in interior or exterior installations to support and to stabilize the chimney while assuring a 2 inch clearance. Wall straps are required every 8 inches on exterior of building ONLY. Manufacturer fts Part Number 9268 8 in DuraPlus Wall Strap, Galvanized Steel Use in interior or exterior installat...
    69841
  • 8 in Dura-plus Wall Strap Stainless Steel
    8 in Dura-plus Wall Strap Stainless Steel
    8 in DuraPlus Wall Strap, Stainless Steel Use in interior or exterior installations to support and to stabilize the chimney while assuring a 2 inch clearance. Wall straps are required every 8 inches on exterior of building ONLY. Manufacturer fts Part Number 9268SS 8 in DuraPlus Wall Strap, Stainless Steel Use in interior or exterior installati...
    69840
  • 8 in Dura-plus Extended Roof Bracket
    8 in Dura-plus Extended Roof Bracket
    8 in Dura-plus Extended Roof Bracket, Has Legs That Extend 64 in-115 in Use to support when it extends more than four feet above the roof. Provides stability to chimney against wind and snow. Mounting brackets and adjustable legs included. Manufacturer part number 9261 8 in Dura-plus Extended Roof Bracket, Has Legs That Extend 64 in-115 in Use to s...
    69870