MENU

Breckwell Common Parts

Breckwell Common Parts
  • Burn Pot Assembly
    Burn Pot Assembly
    Burn Pot Assembly This Burn Pot Assembly is used on all Breckwell Pellet Stoves This burn pot assembly is shown with the stainless steel insert.  Cast iron model no longer available.  This assembly is used on models of Breckwell pellet stoves as shown below: P22 - 1994 models and newer P23 - 1994 models and newer P24 - 1994 models and newer P32 - All Models P1000 - All Models... Burn Pot Assembly This Burn Pot Assembly is used on all Breckwell Pellet Stoves...
    A-S-BURNPOT
  • 6.3A Fuse Breckwell 5 pack
    6.3A Fuse Breckwell 5 pack
    6.3A Fuse - Breckwell - 5 pack 6.3A Fuse - Breckwell - 5 pack...
    16-1019
  • Air Switch CE201
    Air Switch CE201
    Air Switch C-E-201 This Air Switch is used on all Pellet and Multi-Fuel Stoves. This is a safety sensor that will measure the air pressure inside of the combustion chamber.  It is valid for all models regardless of the year of manufacture or model.   Additional Information If this sensor fails to activate, or deactivates after the unit is running, the second light on your control panel... Air Switch C-E-201 This Air Switch is used on all Pellet and Multi-Fuel Stoves....
    C-E-201
  • Breckwell A-E-057KIT Control Panel Conversion Kit
    Breckwell A-E-057KIT Control Panel Conversion Kit
    Breckwell Control Panel Conversion Kit - Control boards are NOT returnable. Please make sure you order the correct control board for your stove! For older model Breckwell P22 and P23 pellet stoves without a digital control board. ONLY FOR STOVES THAT USE 1 RPM AUGER MOTORS Contains C-E-101 digital control panel, C-E-UH1000 wiring harness along with the wiring diagram, instructions, and trouble... Breckwell Control Panel Conversion Kit - Control boards are NOT returnable. Ple...
    A-E-057KIT
  • Breckwell Auger Motor 1 RPM
    Breckwell Auger Motor 1 RPM
    Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from 2003 to present. The shaft of this auger motor is round. P22 - All Units P23 - Serial Numbers 7166 to Present P23I - Serial Numbers 2243 to Present P24 - Serial Numbers 53664 to Present P24I - Serial Numbers 53795 to Present P1000 - All Units P2000 - Serial Numbers 11780 - Present P2000I - Serial Numbers 22208 -... Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from ...
    C-E-017-PP7201
  • Breckwell Combustion Blower
    Breckwell Combustion Blower
    Breckwell Combustion Blower With Housing All Models Except P28 3000 RPM, 1/70 HP, 115 v 60 Hz .6 amp EXHAUST BLOWER MOTOR & GASKET - Plug & Play FITS properly without field modifications. Includes correct wire leads, gasket & heat sensor mounting holes. Fits several pellet stoves including: Breckwell - P24, Big E, P2700 Mojave, P22 Maverick, P2000 Tahoe, P23 Sonora, P23 Sonora,... Breckwell Combustion Blower With Housing All Models Except P28 3000 RPM, 1...
    AE027-10-1113-PP7692
  • Breckwell Combustion Blower
    Breckwell Combustion Blower
    Breckwell Combustion Blower With Housing All Models Except P28 3000 RPM, 1/70 HP, 115 v 60 Hz .6 amp EXHAUST BLOWER MOTOR & GASKET - Plug & Play FITS properly without field modifications. Includes correct wire leads, gasket & heat sensor mounting holes. Fits several pellet stoves including: Breckwell - P24, Big E, P2700 Mojave, P22 Maverick, P2000 Tahoe, P23 Sonora, P23 Sonora,... Breckwell Combustion Blower With Housing All Models Except P28 3000 RPM, 1...
    AE027-10-1113-PP7692
  • Breckwell Control Panel Conversion Kit P24 and P20
    Breckwell Control Panel Conversion Kit P24 and P20
    Breckwell Control Panel Conversion Kit P24 & P20 - Control boards are NOT returnable. Please make sure you order the correct control board for your stove! For 1990 and 1991 model Breckwell P24 and 1991 P20 pellet stoves without a digital control board. ONLY FOR STOVES THAT USE 4 RPM AUGER MOTORS Contains C-E-301 circuit board and C-E-UH1000 wiring harness along with the wiring diagram,... Breckwell Control Panel Conversion Kit P24 & P20 - Control boards are NOT r...
    A-E-CB91KIT
  • Breckwell Control Panel Digital A-E-301 4 RPM
    Breckwell Control Panel Digital A-E-301 4 RPM
    Breckwell Control Panel Digital A-E-301 4 RPM This is the first generation of digital control panels for most Pellet stoves. 5 heat levels - Control boards are NOT returnable. Please make sure you order the correct control board for your stove! If you have an early digital control panel (2002 or older) for one of the following units, this is the control panel that you need: P23 - up to 7165 P23I... Breckwell Control Panel Digital A-E-301 4 RPM This is the first generation of d...
    A-E-301-A1-3
  • Breckwell Pellet Stove Igniter
    Breckwell Pellet Stove Igniter
    Breckwell Pellet Stove Igniter The Igniter Element is used on all models of Pellet Stoves from 1998 to present. A-1 Stoves is an Authorized Northern California Breckwell Dealer. Ignitor Element C-E-IGN 300 Watt 3/8 inch diameter Some notes from the Breckwell SP 23 Pellet Stove User Manual about the Ignitor and the Auger Motor: Put power directly to the igniter element. Watch the tip of the... Breckwell Pellet Stove Igniter The Igniter Element is used on all models of Pel...
    C-E-IGN-PP3511
  • Breckwell Pellet Stove Super Igniter
    Breckwell Pellet Stove Super Igniter
    Ignitor Heating Element for Breckwell Pellet Stoves 250W 3/8 inch diameter Also Fits these Pellet Stoves: Austroflamm Avalon St. Croix 80607 C-E-IGN Ignitor Heating Element for Breckwell Pellet Stoves 250W 3/8 inch diameter Also...
    CEIGN-PP3511
  • Breckwell Wiring Harness for Control Panel to Digital
    Breckwell Wiring Harness for Control Panel to Digital
    Breckwell Wiring Harness for Control Panel to Digital This is the wiring harness you will need to convert your old style control panel to digital. This is JUST the wiring harness. If you need the complete kit, digital control board, wiring harness and full documentation, see HERE. Breckwell Wiring Harness for Control Panel to Digital This is the wiring harnes...
    C-E-UH1000
  • Burn Pot Insert Cast
    Burn Pot Insert Cast
    Burn Pot Insert - Cast This is just the burn pot insert.  It is not the entire assembly.  The stainless steel insert and cast insert are interchangeable, though airflow is slightly different and you may need to adjust your damper settings some for optimal performance if you change your insert type. Burn Pot Insert - Cast This is just the burn pot insert.  It is not the en...
    A-S-INSERT-C
  • Burn Pot Insert Stainless Steel
    Burn Pot Insert Stainless Steel
    Burn Pot Insert - Stainless Steel This is just the stainless steel burn pot insert.  It is not the entire assembly.  The stainless steel insert and cast insert are interchangeable, though airflow is slightly different and you may need to adjust your damper settings some for optimal performance if you change your insert type. Burn Pot Insert - Stainless Steel This is just the stainless steel burn pot ins...
    A-S-INSERT-PP2010
  • C-L-401 Control Panel Faceplate for A-E-401
    C-L-401 Control Panel Faceplate for A-E-401
    C-L-401 Control Panel Faceplate for A-E-401 C-L-401 Control Panel Faceplate for A-E-401...
    C-L-401
  • Ceramic Log Set AMLOG
    Ceramic Log Set AMLOG
    Ceramic Log Set A-M-LOG Ceramic log set for all pellet stove models except P-2000, P-2000I, Big E, and Multi-Fuel corn stove. Ceramic Log Set A-M-LOG Ceramic log set for all pellet stove models except P-20...
    A-M-LOG
  • Combustion Blower Gasket A
    Combustion Blower Gasket A
    COMBUSTION BLOWER GASKET A This gasket fits between the blower motor and the blower housing on the A-E-027 combustion blower. This blower is used on all current pellet stove models. COMBUSTION BLOWER GASKET A This gasket fits between the blower motor and the bl...
    C-G-105-15-1015-PP5200
  • Combustion Blower Gasket B
    Combustion Blower Gasket B
    Combustion Blower Gasket B This gasket fits between the blower housing and the stove. It is designed for the A-E-027 combustion blower used on all current model pellet stoves. Part Number C-G-101 Combustion Blower Gasket B This gasket fits between the blower housing and the ...
    C-G-101-15-1016-PP5202
  • Combustion Blower Large
    Combustion Blower Large
    Combustion Blower - Large Fits these Pellet Stoves: Aladdin, American Energy, APR Industries, Burgess, Earth Stove, England Stove, Even Temp, Freeland, Flame, Glo King, Grainger, Hearthland, Heat Tech Industries, National Stell, Pyro, Sherwood, Travis, US Stove, and Waterford. 8120051 Combustion Blower - Large Fits these Pellet Stoves: Aladdin, American Energy, AP...
    812-0051
  • Combustion Blower Quadrafire 1000 Large
    Combustion Blower Quadrafire 1000 Large
    Combustion Blower - Quadrafire 1000 Pellet Stove Large - Negative Pressure 80 CFM Also Fits these Pellet Stoves: Quadrafire 1000, Aladdin, American Energy, APR Industries, Burgess, Earth Stove, England Stove, Even Temp, Freeland, Flame, Glo King, Grainger, Hearthland, Heat Tech Industries, National Stell, Pyro, Sherwood, Travis, US Stove, and Waterford. Combustion Blower - Quadrafire 1000 Pellet Stove Large - Negative Pressure 80 C...
    812-0051
  • Convection Blower AE033
    Convection Blower AE033
    Convection Blower  Room Air Blower A-E-033 This is an after-market version of the A-E-033 convection blower. It will fit on  most pellet and multi-fuel stoves EXCEPT P20 and P28. Please check the measurements to confirm the hole placement as well as the size of the housing . If you have an older P2700 serial no. 12439 and older, you should order the newest version the A-E-033A ae033 1... Convection Blower  Room Air Blower A-E-033 This is an after-market version...
    A-E-033-11-1210-QPSP
  • Convection Fan Breckwell
    Convection Fan Breckwell
    Breckwell Convection Fan 4 Bolt holes on the mounting plate Line A: 3 3/8 inches Line B: 3 3/4 inches Direct replacement for part 11408 1 Year Warranty  Breckwell Convection Fan 4 Bolt holes on the mounting plate Line A: 3 3/8 inches...
    11-1210-QPSP
  • Door Handle Replacement Kit P32 GOLD
    Door Handle Replacement Kit P32 GOLD
    Door Handle Replacement Kit P32 Door Handle Replacement Kit P32 ...
    A-H-KIT-P32
  • Glass Gasket Kit 1/4 inch 10 ft.
    Glass Gasket Kit 1/4 inch 10 ft.
    Glass Gasket Kit 1/4 in. x 10 ft 1/4 inch flat - self adhesive Glass Gasket Kit 1/4 in. x 10 ft 1/4 inch flat - self adhesive ...
    15-1022
  • Log Set Ceramic P2000
    Log Set Ceramic P2000
    Log Set, Ceramic Breckwell P2000 & P2000I This log set is designed to provide added decor to the bayfront door on the P-2000 freestanding model and the P-2000 insert model. This log set is designed for these models exclusively. IMPORTANT NOTE : You cannot use both the ceramic logs and drop in ash pan at the same time.  Only one or the other may be used. A-M-2000 AM2000 SA20LOG Log Set, Ceramic Breckwell P2000 & P2000I This log set is designed to provi...
    SA20LOG
  • Power Cord CE061
    Power Cord CE061
    Power Cord C-E-061 POWER CORD-DUAL MALE/FEMALE PLUGS USED ON 2003 PELLET STOVE MODELS TO PRESENT. USES THE C-E-071 THREE PRONG RECEPTACLE ON STOVE. Power Cord C-E-061 POWER CORD-DUAL MALE/FEMALE PLUGS USED ON 2003 PELLET STOVE ...
    C-E-061
  • Thermodisc High Temp
    Thermodisc High Temp
    The High Temp Thermodisc is a safety switch located near the convection blower. This important safety device will monitor heat in the stove.  It is used in all of our pellet stoves and the multi-fuel stoves as well. C-E-090-21 CE09021 The High Temp Thermodisc is a safety switch located near the convection blower....
    C-E-090-21
  • Thermodisc Low Limit or Proof of Fire
    Thermodisc Low Limit or Proof of Fire
    The Low-Limit or Proof of Fire Thermodisc is mounted on the Combustion Blower housing in all Pellet stove models from 2003 to present, and also the Multi-Fuel stove. If your stove is older than 2003, please order the adapter plate, part #A-E-090-22C The Low-Limit or Proof of Fire Thermodisc is mounted on the Combustion Blower h...
    C-E-090-22C