MENU

The Sonora P23

The Sonora P23
  • Burn Pot Assembly
    Burn Pot Assembly
    Burn Pot Assembly This Burn Pot Assembly is used on all Breckwell Pellet Stoves This burn pot assembly is shown with the stainless steel insert.  Cast iron model no longer available.  This assembly is used on models of Breckwell pellet stoves as shown below: P22 - 1994 models and newer P23 - 1994 models and newer P24 - 1994 models and newer P32 - All Models P1000 - All Models... Burn Pot Assembly This Burn Pot Assembly is used on all Breckwell Pellet Stoves...
    A-S-BURNPOT
  • ACOWL23BN P23 Brushed Nickle Cowl
    ACOWL23BN P23 Brushed Nickle Cowl
    A-COWL-23-BN P-23 Brushed Nickel Cowl This brushed nickel cowl provides a rich contrast to the metallic black finish of the P-23. This cowl fits both the P-23 freestander and insert models. A-COWL-23-BN P-23 Brushed Nickel Cowl This brushed nickel cowl provides a rich ...
    A-COWL-23-BN P-23 BRUSHED NICKEL
  • Air Switch CE201
    Air Switch CE201
    Air Switch C-E-201 This Air Switch is used on all Pellet and Multi-Fuel Stoves. This is a safety sensor that will measure the air pressure inside of the combustion chamber.  It is valid for all models regardless of the year of manufacture or model.   Additional Information If this sensor fails to activate, or deactivates after the unit is running, the second light on your control panel... Air Switch C-E-201 This Air Switch is used on all Pellet and Multi-Fuel Stoves....
    C-E-201
  • AMBRICK23 P23 Brick Panels
    AMBRICK23 P23 Brick Panels
    A-M-BRICK23 P-23 BRICK PANELS These ceramic fiber brick panels provide an appealing, warm backdrop to your stove's fire glow. A-M-BRICK23 P-23 BRICK PANELS These ceramic fiber brick panels provide an appeal...
    A-M-BRICK23 P-23 BRICK PANELS
  • Auger Motor 1 RPM CE017
    Auger Motor 1 RPM CE017
    Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from 2003 to present. The shaft of this auger motor is round. P22 - All Units P23 - Serial # 7166 to Present P23I - Serial # 2243 to Present P24 - Serial # 53664 to Present P24I - Serial # 53795 to Present P1000 - All Units P2000 - Serial # 11780 - Present P2000I - Serial # 22208 - Present P2700 - Serial # 8445 - Present... Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from ...
    C-E-017-PP7201
  • Auger Motor 1 RPM CE017M
    Auger Motor 1 RPM CE017M
    Auger Motor - 1 RPM C-E-017M This auger motor is used on some of the older Breckwell pellet stoves. The shaft of this auger motor has a beveled edge. It is used on older units that have an analog control panel with the following heat level settings: High, Med, Low or Low, B, C, High Additional Information If the heat level settings for your control panel are Low, B, C, D, E, Max then you... Auger Motor - 1 RPM C-E-017M This auger motor is used on some of the older ...
    C-E-017M-12-1011-QPSP
  • Breckwell A-E-057KIT Control Panel Conversion Kit
    Breckwell A-E-057KIT Control Panel Conversion Kit
    Breckwell Control Panel Conversion Kit - Control boards are NOT returnable. Please make sure you order the correct control board for your stove! For older model Breckwell P22 and P23 pellet stoves without a digital control board. ONLY FOR STOVES THAT USE 1 RPM AUGER MOTORS Contains C-E-101 digital control panel, C-E-UH1000 wiring harness along with the wiring diagram, instructions, and trouble... Breckwell Control Panel Conversion Kit - Control boards are NOT returnable. Ple...
    A-E-057KIT
  • Breckwell Auger Motor 1 RPM
    Breckwell Auger Motor 1 RPM
    Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from 2003 to present. The shaft of this auger motor is round. P22 - All Units P23 - Serial Numbers 7166 to Present P23I - Serial Numbers 2243 to Present P24 - Serial Numbers 53664 to Present P24I - Serial Numbers 53795 to Present P1000 - All Units P2000 - Serial Numbers 11780 - Present P2000I - Serial Numbers 22208 -... Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from ...
    C-E-017-PP7201
  • Breckwell Auger Motor 4 RPM
    Breckwell Auger Motor 4 RPM
    This auger motor is used on some older Breckwell pellet stoves and all of the Multi-Fuel or Corn stoves. P6000 - All Units Pellet Stoves This auger motor was used on most of the older pellet stoves with the analog control panel, and some of the early digital control panel units.  For the older analog control panel stoves look at your heat level settings to determine if this is the auger... This auger motor is used on some older Breckwell pellet stoves and all of the M...
    C-E-010-PP7004-A1-1
  • Breckwell Combustion Blower
    Breckwell Combustion Blower
    Breckwell Combustion Blower With Housing All Models Except P28 3000 RPM, 1/70 HP, 115 v 60 Hz .6 amp EXHAUST BLOWER MOTOR & GASKET - Plug & Play FITS properly without field modifications. Includes correct wire leads, gasket & heat sensor mounting holes. Fits several pellet stoves including: Breckwell - P24, Big E, P2700 Mojave, P22 Maverick, P2000 Tahoe, P23 Sonora, P23 Sonora,... Breckwell Combustion Blower With Housing All Models Except P28 3000 RPM, 1...
    AE027-10-1113-PP7692
  • Breckwell Control Panel Digital A-E-301 4 RPM
    Breckwell Control Panel Digital A-E-301 4 RPM
    Breckwell Control Panel Digital A-E-301 4 RPM This is the first generation of digital control panels for most Pellet stoves. 5 heat levels - Control boards are NOT returnable. Please make sure you order the correct control board for your stove! If you have an early digital control panel (2002 or older) for one of the following units, this is the control panel that you need: P23 - up to 7165 P23I... Breckwell Control Panel Digital A-E-301 4 RPM This is the first generation of d...
    A-E-301-A1-3
  • Breckwell Control Panel with Wiring Harness
    Breckwell Control Panel with Wiring Harness
    Control boards are NOT returnable. Please make sure you order the correct control board for your stove! 30 Day Warranty This is the first generation of digital control panels for most Pellet stoves. For stoves with a 4 RPM auger motor . INCLUDES WIRING HARNESS to purchase the Control Board without Harness CLICK HERE If you have an early digital control panel (2002 or older) for one of the... Control boards are NOT returnable. Please make sure you order the correct contr...
    A-E-950KIT
  • Breckwell Convection Blower
    Breckwell Convection Blower
    Breckwell Convection Blower This Convection Blower is used on all Pellet and Multi-Fuel models except the P20, P28, and some older P2700's. This is the newest version of the A-E-033 convection blower and should be used for all stoves except the P20, P28, and some P2700's. The convection blower circulates heated air through the convection tubes and out into the room.  This kit also... Breckwell Convection Blower This Convection Blower is used on all Pellet and Mu...
    A-E-033-PP7310
  • Breckwell Maintenance Tool
    Breckwell Maintenance Tool
    Breckwell Maintenance Tool ATOOL96 Breckwell Maintenance Tool ATOOL96 ...
    A-TOOL-96
  • Breckwell Pellet Stove Igniter
    Breckwell Pellet Stove Igniter
    Breckwell Pellet Stove Igniter The Igniter Element is used on all models of Pellet Stoves from 1998 to present. A-1 Stoves is an Authorized Northern California Breckwell Dealer. Ignitor Element C-E-IGN 300 Watt 3/8 inch diameter Some notes from the Breckwell SP 23 Pellet Stove User Manual about the Ignitor and the Auger Motor: Put power directly to the igniter element. Watch the tip of the... Breckwell Pellet Stove Igniter The Igniter Element is used on all models of Pel...
    C-E-IGN-PP3511
  • Burn Pot Insert Stainless Steel
    Burn Pot Insert Stainless Steel
    Burn Pot Insert - Stainless Steel This is just the stainless steel burn pot insert.  It is not the entire assembly.  The stainless steel insert and cast insert are interchangeable, though airflow is slightly different and you may need to adjust your damper settings some for optimal performance if you change your insert type. Burn Pot Insert - Stainless Steel This is just the stainless steel burn pot ins...
    A-S-INSERT-PP2010
  • Ceramic Log Set AMLOG
    Ceramic Log Set AMLOG
    Ceramic Log Set A-M-LOG Ceramic log set for all pellet stove models except P-2000, P-2000I, Big E, and Multi-Fuel corn stove. Ceramic Log Set A-M-LOG Ceramic log set for all pellet stove models except P-20...
    A-M-LOG
  • Combustion Blower Gasket A
    Combustion Blower Gasket A
    COMBUSTION BLOWER GASKET A This gasket fits between the blower motor and the blower housing on the A-E-027 combustion blower. This blower is used on all current pellet stove models. COMBUSTION BLOWER GASKET A This gasket fits between the blower motor and the bl...
    C-G-105-15-1015-PP5200
  • Combustion Blower Gasket B
    Combustion Blower Gasket B
    Combustion Blower Gasket B This gasket fits between the blower housing and the stove. It is designed for the A-E-027 combustion blower used on all current model pellet stoves. Part Number C-G-101 Combustion Blower Gasket B This gasket fits between the blower housing and the ...
    C-G-101-15-1016-PP5202
  • Control Panel Digital 1 RPM CE401
    Control Panel Digital 1 RPM CE401
    Control Panel, Digital - 1 RPM C-E-401 Includes board and face plate 5 heat levels Control boards are NOT returnable. Please make sure you order the correct control board for your stove! 30 Day Warranty This control panel is used on most current model pellet stoves except the P22 and P4000 Classic Cast stove. P22 - Do NOT use - See the C-E-101 P23 - Serial # 7166 to Present P23I - Serial # 2243... Control Panel, Digital - 1 RPM C-E-401 Includes board and face plate 5 heat lev...
    A-E-401-US-A1
  • Door Handle Replacement Kit P23 GOLD
    Door Handle Replacement Kit P23 GOLD
    Door Handle Replacement Kit P23 Door Handle Replacement Kit P23 ...
    A-H-KIT-P23-A1
  • Door Rope Gasket Kit 8 ft of 5/8 inch w glue
    Door Rope Gasket Kit 8 ft of 5/8 inch w glue
    Kit Includes 8 Foot of  Black Dense 5/8 Inch Pellet Stove Door Gasket & Tube of High Temperature Stove Cement Fits: Breckwell Austroflamm Pellet Stoves B10864K Kit Includes 8 Foot of  Black Dense 5/8 Inch Pellet Stove Door Gasket ...
    15-1018
  • Glass Gasket Kit 1/4 inch 10 ft.
    Glass Gasket Kit 1/4 inch 10 ft.
    Glass Gasket Kit 1/4 in. x 10 ft 1/4 inch flat - self adhesive Glass Gasket Kit 1/4 in. x 10 ft 1/4 inch flat - self adhesive ...
    15-1022
  • Power Cord CE061
    Power Cord CE061
    Power Cord C-E-061 POWER CORD-DUAL MALE/FEMALE PLUGS USED ON 2003 PELLET STOVE MODELS TO PRESENT. USES THE C-E-071 THREE PRONG RECEPTACLE ON STOVE. Power Cord C-E-061 POWER CORD-DUAL MALE/FEMALE PLUGS USED ON 2003 PELLET STOVE ...
    C-E-061
  • Replacement Glass Freestanding P23
    Replacement Glass Freestanding P23
    Replacement Glass Freestanding Breckwell P23 Breckwell P23 replacement glass 14 3/4 in x 7 3/4 in arc 8 3/4 in Regular maintenance and re-installing glass will require you to tighten glass fasteners. When so doing, ensure that you tighten them lightly, allowing room for the glass to expand when heated. Replacement Glass Freestanding Breckwell P23 Breckwell P23 replacement glass 14...
    C-D-038
  • Replacement Glass Freestanding P23
    Replacement Glass Freestanding P23
    Replacement Glass Freestanding Breckwell P23 Breckwell P23 replacement glass 14 3/4 in x 7 3/4 in arc 8 3/4 in Regular maintenance and re-installing glass will require you to tighten glass fasteners. When so doing, ensure that you tighten them lightly, allowing room for the glass to expand when heated. Replacement Glass Freestanding Breckwell P23 Breckwell P23 replacement glass 14...
    C-D-038
  • Thermodisc High Temp
    Thermodisc High Temp
    The High Temp Thermodisc is a safety switch located near the convection blower. This important safety device will monitor heat in the stove.  It is used in all of our pellet stoves and the multi-fuel stoves as well. C-E-090-21 CE09021 The High Temp Thermodisc is a safety switch located near the convection blower....
    C-E-090-21
  • Thermodisc Low Limit or Proof of Fire
    Thermodisc Low Limit or Proof of Fire
    The Low-Limit or Proof of Fire Thermodisc is mounted on the Combustion Blower housing in all Pellet stove models from 2003 to present, and also the Multi-Fuel stove. If your stove is older than 2003, please order the adapter plate, part #A-E-090-22C The Low-Limit or Proof of Fire Thermodisc is mounted on the Combustion Blower h...
    C-E-090-22C